Search the forum,

Discuss Bar Shower hot on right cold on left in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
11
Hi everyone,

I am looking to see if anyone has purchased a bar shower where the hot is incoming from the right and cold coming from the left, really struggling to find a bar shower and riser kit to accommodate this, any advice be much appreciated thanks
 
Hi, this doesn’t really answer my question sorry
To answer your question - no I have never purchase such a shower.

but in an attempt to help I posted that previous thread.

Have you tried Googling: "bar shower reversed inlets"

I know it's in Europe but you can still purchase it!

There is Grohe bar shower in which you can fit a reverse cartridge.

There is the Mira MiniDuo which is convertible

There are not many choices, and with Grohe you may have to buy a conventional shower plus the reverse cartridge, as they don't seem to sell the reverse version alone.
 
Is there not anywhere you can cross the pipework on its way to the shower?
Under a floor or within a studwall from the rear if necessary.
 

Reply to Bar Shower hot on right cold on left in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock