Search the forum,

bartlett fryer D10G

Post new thread
  • Thread starter big steve
  • Start date
  • Replies 2
  • Views 4K

Discuss bartlett fryer D10G in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

big steve

Hi does anyone know where Bartlett & sons have gone? They have possibly been swallowed up by a bigger firm, I need the technical specs for the fryer. Can any one help?
 
Still going (or at least were last year). Contact their technical support
 
Status
Not open for further replies.

Reply to bartlett fryer D10G in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
208
Thomas J Marshall
T
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
252
oz-plumber
O
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
313
oz-plumber
O
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
198
ShaunCorbs
ShaunCorbs
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
254
Dave Moore
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forums
UK Tiling Forum
UK Tiling Forums
Tile Advice
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock