Search the forum,

Discuss Boiler cuts off and makes loud bang sometimes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
19
I've been renting a flat I never lived in for the past 5 months. The tenants noticed that when using the shower the temperature of the water fluctuates from time to time. They turned up the water temperature on the boiler itself - which seemed to keep a consistent temperature when using the shower.
However, recently the boiler sometimes cuts off (stop heating the water while they are in the shower) and when they restart it sometimes makes a very loud banging sound, like a release of pressure or something.

Any ideas?

I tried sending a plumber twice but they didn't show up so just checking here until I find someone else.

Thanks a lot!
 
Best get a gas safe engy out and not a plumber
 
Hi all,

Since I last posted I managed to get a few more details.
This problem occurs when using other taps in the flat, so it is not a problem with the shower tap.
When the boiler (Biasi ActiveA) cuts out the error code is 'An 11' which means 'parasite flame' and the temperature is 40+

After dealing with some flaky engineers I managed to get a quote from one on the phone, he says it is the circuit board that needs replacing and the cost is £300.

Does this sound right?

Many thanks,

Tuli
 
Don't have a clue and doubt anyone on here would unless your In front of it

Basi have a repair service might be worth asking them how much to fix it
 
No, no air was removed. Nothing was done so far as the engineer that came over said he couldn't help as the boiler was not acting up at that particular moment (it only happens sporadically).
If air is the problem, is that something I can try to sort out myself or is that a job for an engineer?
 

Reply to Boiler cuts off and makes loud bang sometimes in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
213
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
161
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
237
P
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
326
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock