Britony Combi SE with no GC number on the badge plate

Post new thread

Discuss Britony Combi SE with no GC number on the badge plate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

manx12

Went to service a Britony Combi SE (about 9 years old) a number of problems.. firstly; installed in the cellar with the PRV open pipe to cement floor
Secondly; no GC number on the badge plate only ***- xxxx-***
Thirdly: it is a 24kw combi installed on a heating system containing 20 rads (big house split into bedsits),
From discussing with tenants the boiler does occasionally lockout, it has not been on since April, when we tried to start it, it was not getting to ignition sequence (will be replacing APS tomorrow)..
what a mess...
 
Status
Not open for further replies.

Reply to Britony Combi SE with no GC number on the badge plate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
292
PSxxxxxx
P
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
326
DIwhYdidIstartThis
D

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock