Search the forum,

Discuss butane gas tank and electric fence? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jimR345

Hello!
I have a butane tank standing under or close to an electric fence for the horses.
My question: Could this become a dangerous situation
if somehow the wire would come down and touch the surface
of the tank?
I know that the easiest solution would be displacing the tank,
but I want to ask, if there would be any risk in getting sparks
into the tank or if they would stay at the outside surface.
Thanks for your help,
VC
 
For those not used to such fences they are very low voltage and generally run off 12v car batteries.
Just thought I`d throw that in before anyone answers.
 
Not much current , so damage to tank cometic (=paint)
(unlike a welder) .
So long as tank is stood on ground , =earthed , can see few consequences , bar regular checks for leaks .
(and not going out of way to make sparks when changing bottles)

Fencers do make 500V -to 1kVspikes ..ouch, Enough to get thru clothing / fur . (12V..!)
 
Status
Not open for further replies.

Reply to butane gas tank and electric fence? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. Itā€™s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
226
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
262
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
439
Hello all, Iā€™m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. Iā€™m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
230
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock