Carbon steel ( mapress Sanha, xpress etc)

Post new thread

Discuss Carbon steel ( mapress Sanha, xpress etc) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Chalked

Chalked

Esteemed
Plumber
Gas Engineer
Messages
5,021
Looking to do a few large heating systems in this. Mains and plant room. Obviously using copper on potable supplies.
Have heard though, that even when looked after well. Ie, chemically dosed correctly and kept as oxygen free as possible. Apparently only has a 20-25 year life span!!
Is this true?
 
Status
Not open for further replies.

Reply to Carbon steel ( mapress Sanha, xpress etc) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

N
  • Locked
Low carbon steel to copper mapress joints
Can 15mm low carbon mapress steel be joined directly to copper pipe of the the same size? Without a diaelectric break ie brass fitting. Have...
Replies
10
Views
5K
nicro3
N
AlexGas
  • Locked
27 Historical Events that Shaped Modern Plumbing Systems
Imagine what life would be like without a modern plumbing system. How would you cope without running water or flushing toilets? Water is the most...
Replies
9
Views
2K
Dotty
D
J
  • Locked
Drain and Caustic soda; has soda set hard?
Dear All, Sorry so long but a interesting question. Have been using caustic soda to keep toilets and showers clean and free running in my house...
Replies
18
Views
14K
Jillian
J

Newest Plumbing Threads

Back
Top