Hi all,
Just had a column radiator fitted with an ENZO TRV valve (non bi-directional) on the flow inlet pipe. When heating is turned on, the radiator stays cooler at the bottom even though the valve is fully open.
Tried unscrewing the valve head off and the radiator heats up at the bottom. We think when the valve head is screwed on in the fully open position, it is pushing the pin down by about 3mm. Any ideas? Thanks
Just had a column radiator fitted with an ENZO TRV valve (non bi-directional) on the flow inlet pipe. When heating is turned on, the radiator stays cooler at the bottom even though the valve is fully open.
Tried unscrewing the valve head off and the radiator heats up at the bottom. We think when the valve head is screwed on in the fully open position, it is pushing the pin down by about 3mm. Any ideas? Thanks