Search the forum,

Connecting 3rd gen nest to vailliant 838 ecotec plus

Post new thread

Discuss Connecting 3rd gen nest to vailliant 838 ecotec plus in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Motocross46

Hi I am new to this and not sure how to put up a pic without it saying denied.I am unsure how to connect the nest heat link to this combi. Any advise would be great
 
Are you gas safe reg?
 
Motocross46 said:
No buddy just a general diy'er
Click to expand...

Tbh you will be better getting a gas safe engy in as it may need the cover off to your boiler, for this you need to be gas safe
 
Agree I have had the cover up and opened the controll box with the boiler off. Didn't know you need to be gas safe reg for tht.
 
That's fine however the cover forms a combustion seal and you have no means to test it's back on properly
 
Status
Not open for further replies.

Reply to Connecting 3rd gen nest to vailliant 838 ecotec plus in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
262
oz-plumber
O
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
153
Lou
Lou
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
314
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
158
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
372
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Talk
DIY Forum
Tiling Tools for Beginners
Tile Talk
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock