Search the forum,

Discuss Considering buying an Ariston Lux 6L for undersink installation. in the DIY Plumbing Forum area at PlumbersForums.net

Messages
1
Hi, the Lux 6L needs 1bar pressure in the manual, but I want to gravity feed it from the hot water line - given that we waste more that 6L of cold getting hot from the tank - that would be about 0.4 bar. Is that enough for an unvented heater? Intenting to seal it to expand back into hot feed pipe.
 

Reply to Considering buying an Ariston Lux 6L for undersink installation. in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
122
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
228
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
324
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock