Discuss damaged tile on shower fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
7
Hi all. Any idea on the best way to repair this quite visible chip around the shower tap fitting? Is it a matter of trying replacing it? what is the best way to solve the issue avoiding damage to the other tiles and to the shower screen (frameless one with hinges attached to the adjacent tiles)? thanks
 

Attachments

  • Shower 2.jpg
    Shower 2.jpg
    273 KB · Views: 27
Depends does it bother you atheistic wise if not just put a bead of clear silicon round the bar mixer shroud
 

Reply to damaged tile on shower fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
278
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
274
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
224
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
343
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
304
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock