Search the forum,

Discuss Diverter for free standing bath in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

gavinstephenson

Hello


I bought this bath for a bathroom refit:


www.betterbathrooms.com/lisbon-1650-x-750-luxury-freestanding-bath


The taps selected to go with it were the Bath Shower Mixer 4 Hole Set:


[DLMURL]http://www.adora-bathrooms.co.uk/products/tap-collection/style.php[/DLMURL]

Excuse <dot> but post won't submit with URLs for some reason.

URLs sorted. Croppie

The problem is the diverter does not fit between the two skins of the bath as the inlets / outlets are in a T with the third exiting at 90 degrees rather than all pointing vertically downwards.


Have tried every which way to fit them but the lack of space and difficult working angle, plus considering cutting the back of the bath out, have resulted in no joy.


Is there anywhere I can get another diverter, keeping the taps, where the inlets / outlets are all in the same plane pointing downwards. Have tried the local supplier and looked online but I was hoping if someone had similar challenges in the past they may have a diverter that would fit.


Many thanks.
 
Last edited by a moderator:
you are finding out why most tradesmen dont buy off internet sellers. sorry but as i am lazy i cant look at where you got your kit from as it is all too hard to rewrite the addresses
 
Last edited by a moderator:
sorry but as i am lazy i cant look at where you got your kit from as it is all too hard to rewrite the addresses[/QUOTE]

I have to admire your honesty.
 
if you havent drilled any holes, swap it for a 2 hole attachment and forget the 4 hole which is probably best for a corner bath set against a wall. if not, havent a clue unless we can see what your on about, doubtful if you can bodge it in myself.
 
You could cap off the 90 degree connection and just use the retractable handset.

You don't need two on a freestanding bath
 
Status
Not open for further replies.

Reply to Diverter for free standing bath in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
183
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
401
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
262
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock