Discuss Drain hose - integrated washing machine / condensing dryer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
10
Hi

Would like to extend this hose to a total of 3.2m (which is ok in the manual)

Can I route the hose down to floor level (so as to go underneath the oven and cabinets etc) before then coming back up to connect in to the sink? Or is that not allowed / would cause problems?

Thanks! :)
 

Reply to Drain hose - integrated washing machine / condensing dryer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi My washing machine is 5m away from the water mains copper pipe/valve. I've currently got a long blue inlet hose connecting the washing machine...
Replies
2
Views
711
A few months ago I wanted to connect a 1000l water butt (fabricated from galv steel) to our washing machine. After trawling many forums and...
Replies
2
Views
520
Hi, I am probably being unduly paranoid here but I noticed under our kitchen sink that there is some corrosion evident on a small section of...
Replies
9
Views
300
Hi, I have just moved the washing machine into the garage and it will not drain. I wonder if it's something to do with the way I have installed...
Replies
6
Views
1K
Hi, I have an issue with the standpipe trap in a 3-year-old flat. This flat came with a fitted dishwasher that has been completely unused for that...
Replies
6
Views
972
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock