Search the forum,

Electrical trunking/conduit brackets?

Post new thread

Discuss Electrical trunking/conduit brackets? in the Plumbing Tools area at PlumbersForums.net

gmartine

gmartine

Esteemed
Gas Engineer
Messages
2,340
Having a brain fade, I had a boxful and now I can't find them anywhere. Seen, bought or used these.? Used for extra trunking support, no not my pants.

IMG_0422.JPG
 
What size 25mm ?
 
I would have said top hat bracket as Shaun above but the drawing is a top hat bracket with only 1 fixing. Never seen
 
Me neither, I got them from a commercial factory sparky that did some work for me ages ago and they've been quite useful to have over the years especially if you want to secure some trunking in a corner say,
 
gmartine said:
Me neither, I got them from a commercial factory sparky that did some work for me ages ago and they've been quite useful to have over the years especially if you want to secure some trunking in a corner say,
Click to expand...

were they coated eg red / orange or white
 
Micc cable clips
 
Closest I could find, just not very pretty.

Cable Clips

Our range of Cable Clips include twin & earth cable clips, round cable clips, self-adhesive cable clips and trade tubs. Our cable clips come in grey, black and white colours and are available for a huge range of cable sizes. Our Cable Clips come from trusted brands Schneider Electric and GreenBrook.
www.medlocks.co.uk www.medlocks.co.uk
 
Normally just screw through the trunking
 

Reply to Electrical trunking/conduit brackets? in the Plumbing Tools area at PlumbersForums.net

Similar plumbing topics

T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
213
Thomas J Marshall
T
K
Running copper pipework above / across a Gas boiler?
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
2
Views
163
kristeva
K
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
162
Lou
Lou
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
292
exedon2
exedon2
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
288
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Advice
UK Tiling Forums
Tilers' Talk
Tilers Talk
DIY Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock