Questions and plumbing advice in the Canada - Plumbing Advice primarily for Canada, by Plumbers Forums..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
We are from Alberta, and I own an electrical company.
I have been asked by a BC Mechanical P...
Hello all, my wife and I have recently purchased a house in Edinburgh (move in date 6th dec...
Hello,
I've just bled my loft radiators and now boiler is low pressure. On looking under...
Need advice around these clicking sounds. I posted last week, but I didn’t get much luck. This I...
Hi all just joined 😃
Last month I had a Worcester Bosch 24ri fitted on my own place it's all...
Plastic Thermostatic Dial has broken. Need alternative option as Sirrus Ts1600 is discontinued...
My washing machine is leaking out the drawer. I ran some washing machine cleaner no use, cleaned...
Have traditional vented indirect system, in my case F&E tank base same level as large tank, so...
Hi Guys, called out to a Biasi M90 with no DHW or CH. ignition pcb was faulty but since realised...
I have a Drayton Digistat 1 Room Thermostat which ran out of Battery. I replaced with a new set...
I'm looking at a MiGenie Dual system to control my heating system wirelessly, as it is 'nearly'...
I’m wondering weather this stringy stuff (see photos) around my towel heater’s pipe joints could...
Hi guys,
This is my first post so apologies if this isn't the right section for the post.
I'm...
I’ve got advantage invented hot water storage RM cylinder.
I have got coil1 soil 1
Both are...
I bought a new replacement indirect vented cylinder and immersion but it turns out that the...
Hi all, I'm new to this forum, I apologise if I miss any protocols
My issue on the face of it...
This tap is located in the water supply for my sink and washing machine. It has two holes in it...
The mechanical thermostat on my Worcester boiler is not working properly. I can turn on the...
We have some large Britannia brass taps, one of which has begun to leak pretty badly because the...
Hello everyone,
I need a bit help around a noise coming from possible pipes.
I live in a end...
Hello, looking for some advice about an issue that's just occurred.
We have an 18yr old semi...
Hi,
We are redoing our ensuite bathroom and I am trying to find a shower. Does anyone have an...
Hi Gents.
Looking for a bit if advice regarding low loss headers.
I have fitted a few with my...
Evening gents
I have a Worcester green star ri controlled by a Honeywell st9420c controller and...
It’s Christmas! The elves at the forums have been working away to bring you the first ever...
Hi, I need some advice on an Albion Mercury Gold Unvented Cylinder. I have been told that the...
I need to replace a broken circulating pump, Grundfos UP20-BXUT. I'm struggling to find one (I...
Hi all,
Question from a complete non-expert - I'm about to have some extension work start in my...
hi , Ive only ever fitted bathrooms and put in what somebody else has already sorted out...
I have a very long outlet pipe from my ensuite bathroom which runs from near the front of the...
Hi guys, before anyone jumps to tell me “get a plumber”, I’m extending my house and doing a loft...
Hi having issues with getting what i think is a fair price
Have a boiler with 2 connections as...
The red one is sewage system. The workers put the vertical plumb where the big black dot is...
Hi
P{lease can anyone identify which manufacturer and model is shown in the photos. The...
Any advice on how to clear this type of drain?
Hello, I’m hoping I can get some advice from those knowledgeable with this type of radiator. I...
Hi all,
I’ve just moved into a house with Oil heating, I have a thermostat that just controls...
Hey everybody. See pictures attached. We have an American Standard dual flush toilet. It's...
Hi, my first post. What should I expect to pay to have 6 new TRV's fitted (per rad)? Is it a job...
I have a kitchen mixer tap with one simple lever controlling temperature and flow. The street...
Ideal Icos HE18.
Y plan.
Ok when on constant.
Set to auto and when firing up of an evening...
Is there any reason why the pump and valves need to be located in the airing cupboard?
We have...
Sorry if this is in the wrong section, can an admin please move it if necessary.
My multi fuel...
Greenstar junior 24i. It's been checked a few months ago.
I haven't actually used it for...
I have a new Viessmann Vitodens 100 Boiler-working perfectly. I have a Honeywell Frostat and...
Hi I have a fully pumped system. CH hasn't been used since April. Last Friday was a bit chilly...
OK, time served aerospace engineer here.
Here's my query.
Mums house has a very old floor...
Hi, I'm looking to change my downstairs bathroom to a Wetroom. It's currently an enclosed...
Newest Plumbing Threads
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 0
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 1
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0