Ferroli optimax pcb blow

Post new thread

Discuss Ferroli optimax pcb blow in the Central Heating Forum area at PlumbersForums.net

W

winchmore

Messages
3
Ferroli optimax 25 OV
Pcb blew after turning on after pump replacement. Nothing on display blank.power on board ok. Fuse not blown? Hence Could also be ignition dcfo2.1 pcb? Could this also blow? May need to replace both?

Awaiting refurb Display board. Any advice many thanks
 

Reply to Ferroli optimax pcb blow in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

N
    • Funny
    • Optimistic
Pcb keeps cutting out
Hi, I've got a ferroli 901 boiler, I initially thought the pcb was at fault so bought a new one and I'm having the same problem ( has been...
Replies
2
Views
622
NEILC25
N
W
Worcester Junior 28i Faulty PCB Board
I need some help with a Worcester Junior 28i gas boiler and I'm hoping someone here may have came across this fault before ... I have checked...
Replies
1
Views
1K
ShaunCorbs
ShaunCorbs
S
Ideal Logic Combi 30 - pump only keeps activating for 4 mins.
Hi, As per the thread title, I have an Ideal Logic Combi 30 and I am having a problem with the pump, which keeps activating without any DHW/DCH...
Replies
2
Views
1K
SteveE63
S
F
Constant Lockout issue with Ideal Concord CXS/SD40/H
In our Village Hall we have a Ideal Concord CXS/SD40/H central heating boiler. This was installed new when we had an extension built and the...
2
Replies
10
Views
1K
FozzieBear
F
S
Gas boiler leak/advice please
Hi all, looking for some advice please. So I've got a 25 year old Ideal classic NF40 boiler. We live in a naturally warm house so only have the...
Replies
4
Views
1K
adomas
A

Newest Plumbing Threads

Back
Top