- Messages
- 7
The title says it all really.
I had a new replacement gas hob and boiler fitted to an existing installation by a local Gas Safe engineer. However the hob failed (ignition circuitry malfunctioned) and whirlpool who manufactured it arranged to warranty replace the whole thing (there were loads of problems trying to get the part required).
The Whirlpool fitter came today, disconnected the old hob (during which time he switched off the mains so had access to the meter cupboard).
He then proceeded to remove the old hob and replace it with the new one.
He then said that the gas meter is too close to the electric meter so would not proceed with the connection to the gas as it is unsafe. He implied (I wasn't in, so my wife spoke with him) that it could not be connected until the gas and/or electric meter had been separated.
It is true that the gas meter is not 150mm away from the electric meter however this is an old house in which the meters were fitted many years ago - I believe before the intro of the regs that apply.
However I am now left without a hob(!).
My question is whether he is right to refuse to connect as the gas meter was sited before the regulations requiring a gap of 150mm came in and at the time complied with all relevant regs.
Many thanks - hoping for some guidance as I have a young family and could really do with cooking them some food(!)
Ben
I had a new replacement gas hob and boiler fitted to an existing installation by a local Gas Safe engineer. However the hob failed (ignition circuitry malfunctioned) and whirlpool who manufactured it arranged to warranty replace the whole thing (there were loads of problems trying to get the part required).
The Whirlpool fitter came today, disconnected the old hob (during which time he switched off the mains so had access to the meter cupboard).
He then proceeded to remove the old hob and replace it with the new one.
He then said that the gas meter is too close to the electric meter so would not proceed with the connection to the gas as it is unsafe. He implied (I wasn't in, so my wife spoke with him) that it could not be connected until the gas and/or electric meter had been separated.
It is true that the gas meter is not 150mm away from the electric meter however this is an old house in which the meters were fitted many years ago - I believe before the intro of the regs that apply.
However I am now left without a hob(!).
My question is whether he is right to refuse to connect as the gas meter was sited before the regulations requiring a gap of 150mm came in and at the time complied with all relevant regs.
Many thanks - hoping for some guidance as I have a young family and could really do with cooking them some food(!)
Ben
