Search the forum,

fitting Tornado towel rails

Post new thread

Discuss fitting Tornado towel rails in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

MATT-

Hey has anyone fitting Tornado Towel rails? Any one else had trouble getting the clamp part of the clip that connects to the radiator the clip firmly?
 
Status
Not open for further replies.

Reply to fitting Tornado towel rails in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
heatrae sadia 25l 9004010.
Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
2
Replies
39
Views
726
John.g
J
D
UK Pipes for thermostat shower fitted at different heights
Pipes for thermostat shower have been fitted at different heights. Any way of rectifying without ripping all tiles. So for clarity 15mm pipes sunk into wall behind bath. Walls have fresh tiles. Have realised as about to fit shower these pipes one is set higher than the other. If you fit a...
Replies
2
Views
205
fowlerboi
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Lou
Lou
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
229
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

BS 5389 Tiling Standards
Tiling Advice Live
Tiling Advice
Tiling Tools
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock