Fluidmaster concealed cistern

[Matt0029]

Are these connectors any good that come with the fluidmaster concealed cistern they seem to move still when tight. Thanks

 

[Ben-gee]

I always bin them , they are nasty rubbish

 

[ShaunCorbs]

Normally use a angled 1/2 valve (I know you can’t use it but it’s easiest way to adapt) then a valve lower down if you choose to etc

 

[Matt0029]

Normally use a angled 1/2 valve (I know you can’t use it but it’s easiest way to adapt) then a valve lower down if you choose to etc

I used a no.63 and a valve lower down

 

[Matt0029]

A bent service valve was no good as couldn't really get to turn the iso off on it. The plastic thing seemed really flimsy

 

[ShaunCorbs]

A bent service valve was no good as couldn't really get to turn the iso off on it. The plastic thing seemed really flimsy

No but if you install an iso below you won’t have to touch it and it’s an easy thing as most have them

They make 90 degree flexis monster plumb do them I think