Discuss Gas Safe Certficate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

RobbieP14383

I recently had a brand new boiler fitted by a GSR'd engineer. I am a land lord and I was not there when the boiler was installed. I am having a lot hassle trying to get my gas safe certificate for my records as its the law to have one.

Where do I stand and what can I do to resolve this?

Thanks

Additional:
I have emailed, text and called the engineer but he always says yeah I promise tomorrow I will email you a scanned copy etc etc. This never happens
 
Last edited by a moderator:
The installer is obliged to notify Local Authority Building Control, pay a couple of quid to them, and they will send you a certificate in the post. I notify all of my boilers immediately, and the customer usually gets the certificate that week. I suggest you ring the engineer and politely tell him if you dont have your certificate within the next week or two, you will be chasing up the certificate yourself, and ringing Gas Safe. Im sure he will then change his tune.
 
dont need one for the first year, benchmark will cover regs
 
dont need one for the first year, benchmark will cover regs

I think you are refering to Land lord gas safety record.

This Landlord is looking for the building regulations certificate which GSR will issue under self certification scheme (Competent person scheme).
 
call gas safe they will instantly tell you if the boiler is registered - you only have so long to register cant remember how long
 
ive done some almost a year after install and it was fine.

if the op is after a gas safety certificate then you should not have handed over the dosh till you got the paperwork you wanted tbh.

Tell the engineer your asking gas safe for a free inspection of his work and he will probably buck his ideas up.
 
I often wonder who is responsible for getting building control to issue a certificate of compliance with building regs. After all it is actually the owner of the property who has to inform building control of changes etc, not the installer or builder. So if you as a boiler installer dont offer this as part of your installation, who says you have to issue a self certification ticket, my reasoning is if the customer wants a certificate, they should pay for me to issue one and I include a charge in all my quotes/estimates. I fill in the benchmark paperwork as req by the manufacturers, but why do I need to give up more time complying with building regs for free if it isnt my responsibility?

As regards the post I think he wants a land lord safety ticket and I understand an appliance does not require one in its first year if all the benchmark paperwork has been completed correctly.

Comments welcome
 
it cost a few squid and take about 5 mins, no problem in my eyes to do it just add the charge to your quote. Leave a customer chasing something could make you look bad and lose future work.


As for gas cert, fill one out when you benchmark/commission it take a few mins and customer is happy.
 
I often wonder who is responsible for getting building control to issue a certificate of compliance with building regs. After all it is actually the owner of the property who has to inform building control of changes etc, not the installer or builder. So if you as a boiler installer dont offer this as part of your installation, who says you have to issue a self certification ticket, my reasoning is if the customer wants a certificate, they should pay for me to issue one and I include a charge in all my quotes/estimates. I fill in the benchmark paperwork as req by the manufacturers, but why do I need to give up more time complying with building regs for free if it isnt my responsibility?

As regards the post I think he wants a land lord safety ticket and I understand an appliance does not require one in its first year if all the benchmark paperwork has been completed correctly.

Comments welcome

not benchmark the cert issued by gas safe covers the boiler for a year.boiler must be registered
 
Status
Not open for further replies.

Reply to Gas Safe Certficate in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
Hi all, I am a plumber but I do not carry out works to boilers as the majority of my is bathrooms so I am not gas safe. I have completed a...
Replies
1
Views
516
The self-certification certificate states that "....the work was carried out in accordance with Gas Safety (Installation and Use) Regulations, as...
Replies
0
Views
910
Not sure what my options are here. Basically a friend of mine recommended his father in law to do our plumbing/gas work for our renovation. First...
Replies
18
Views
2K
Had our gas Baxi Combi inspected and serviced today, as it has been every year. Gas safety cert issued and says all okay, but engineer gave what I...
Replies
4
Views
586
Just browsing the threads and this one here // www .plumbersforums. net /threads /bldg-regs-compliance-interlock.103043/ caught my eye. 1. If a...
Replies
0
Views
1K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock