Discuss Gas safety certificates in the Gas Engineers Forum area at PlumbersForums.net

Messages
3
Hi all gas engineers. While doing landlord’s gas safety , if gas hob do not have data badge or manual . How can we test it for safe to use ??
 
They’re not needed, flame picture and 26.9 checks really. If it’s landlords hob then I think the same applies, maybe with exception to checking ffd’s and gas rate maybe?
 
They’re not needed, flame picture and 26.9 checks really. If it’s landlords hob then I think the same applies, maybe with exception to checking ffd’s and gas rate maybe?
Hi Chris thanks for reply. Well can’t gas rate it coz don know whats’s the output. Can working pressure at the meter would be enough or just the flame picture . FSD is alrite
 
Wp meter wp appliance and check safety’s
 

Reply to Gas safety certificates in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Outside of using a gas-safe LPG engineer, do I have to notify building control for the installation of pipework, hob and a 15kg propane bottle?
Replies
0
Views
496
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was...
Replies
0
Views
265
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
579
I am troubleshooting a gas hob where one burner is reluctant to light. When it is lit and I blow the flame out the FSD on that burner cuts off...
Replies
2
Views
374
Hi, I’m changing my kitchen and swapping from a gas hob to an electric induction hob. Rest assured, I have no intention of doing any work at all...
Replies
1
Views
785
Back
Top