Good or bad idea - would you like it and be Interested in?

[Sharp Point]

That's the way I plumb. I chose Latest technology which customers like. No one has ever said that plumbing is cheap. I don't do cheap but quality.

Steady on old boy, that could stir up a hornets nest. I’ll rephrase that for you ‘ I don’t do cheap( I use press fittings) and a I strive to do a quality job.... ‘ as do most folk who use a blow torch too’

There....all re-phrased

 

[Riley]

My point is Ron if they don’t have the budget why are you not offering to solder it for them then you could meet insulation requirements and still be quids in I’m missing the point I don’t believe any customer is going to choose more expensive fittings over saving money by insulating

 

[Sharp Point]

You and your contest show me some of your installs darling I'd be really curious

I don’t really take pictures anymore, especially of boilers. I’ve put 1000’s in over the years ( spent years contracting) the novelty wore off, many many moons ago.

 

[Riley]

That's the way I plumb. I chose Latest technology which customers like. No one has ever said that plumbing is cheap. I don't do cheap but quality.

And you really do need to read your messages before you post as you are implying that you do a better job than everybody else just because you use pressfit

 

[Old Account]

Steady on old boy, that could stir up a hornets nest. I’ll rephrase that for you ‘ I don’t do cheap( I use press fittings) and a I strive to do a quality job.. ‘ as do most folk who use a blow torch too’

There....all re-phrased

I'm not saying you doing a crap job and doing using cheap materials... but if you feel

Steady on old boy, that could stir up a hornets nest. I’ll rephrase that for you ‘ I don’t do cheap( I use press fittings) and a I strive to do a quality job.. ‘ as do most folk who use a blow torch too’

There....all re-phrased

I am not saying you don't do quality jobs or use cheap materials but if you feel spoke to ... perhaps you should not try to see the bad things but taking things a little easier. We are talking about some fittings and so on ... you k ow for certain what I mean and did not mean anything different so stop trying to twist things

 

[Old Account]

My point is Ron if they don’t have the budget why are you not offering to solder it for them then you could meet insulation requirements and still be quids in I’m missing the point I don’t believe any customer is going to choose more expensive fittings over saving money by insulating

I get your point riley

 

[ShaunCorbs]

..

 

[Old Account]

And you really do need to read your messages before you post as you are implying that you do a better job than everybody else just because you use pressfit

That's only the people who feel spoken to. I am not implying anything but said that I am offering quality work. There is no need to misunderstand me again as you all know that's not what I meant

 

[Sharp Point]

I'm not saying you doing a crap job and doing using cheap materials... but if you feel

I am not saying you don't do quality jobs or use cheap materials but if you feel spoke to . perhaps you should not try to see the bad things but taking things a little easier. We are talking about some fittings and so on . you k ow for certain what I mean and did not mean anything different so stop trying to twist things

I’m not twisting things, I’m trying to make light of the way you say things, because the way you write can be taken the completely wrong way Ron.
Making statements of pressfit is safer, last longer etc etc is bold. I think sometimes you forget that you’re on a plumbing heating and gas forum, surrounded by chaps who’ve probably been doing this 45+ years. I think we know what’s good and isn’t ..... if you get me.

When you post, be prepared to be questioned and analysed

 

[Riley]

Saying you do quality not cheap implying that anyone that anyone using end feed is cheap. It’s not a case of misreading or misinterpreting it’s in black and white. The real comparison was you do more expensive whilst others do cheaper the opposite of quality is poor quality

 

[Sharp Point]

Saying you do quality not cheap implying that anyone that anyone using end feed is cheap. It’s not a case of misreading or misinterpreting it’s in black and white. The real comparison was you do more expensive whilst others do cheaper the opposite of quality is poor quality

Can we put it down to his lack of English language and inability to express what he actually means. We don’t want another ‘vaillaht servicing’ debacle.....

 

[Harvest Fields]

You’re all missing the point and gone off track a little. @ShaunCorbs was simply pointing out that you @Matchless.plumb from the picture you posted have used a Mapress water fitting on a gas pipe and then rather than say sound, I’ll look into that and get back to you. Decide to dig your heels in as usual and baffle everyone with stuff that has nothing to do with the relevant point. It was a point to stop you from getting into trouble at a later date not a Critisism. It was an advisory to say you may want to go back and change it for a gas one.

 

[Harvest Fields]

Can we put it down to his lack of English language and inability to express what he actually means. We don’t want another ‘vaillaht servicing’ debacle...

To late.

 

[Sharp Point]

To late.

I know...

I feel some wee Germans dummies being thrown shortly.

 

[Old Account]

Don't you worry @bogrodder wo t happen. I'm out