Discuss hanging a bath shower screen in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Eyespy999

Plumbers Arms member
Plumber
Messages
148
Morning, i am hanging a shower screen, fixing onto tiles which are fixed onto plasterboard. Does anyone have any reccomendations on the type of fixing i should use, i.e. rawl plug or a toggle type fixing?

Thanks in advance.
 
I use rawlplug UNO plugs (brown ones ), but drill a neat 7mm hole, and tap them in gently , put a line of silicone on the section that fits to the wall.
 
Depends what's behind the tiles&plaste board,
If its brick You want to drill a bigger hole in the tiles than the screw/plug and push the plug all the way through the tiles
If timber a hole bigger than the screw will do and fix
 
Status
Not open for further replies.

Reply to hanging a bath shower screen in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON...
Replies
6
Views
295
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
307
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from...
Replies
0
Views
116
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock