Search the forum,

Discuss Having problems posting in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jaybead

Hi,

I'm a newbie and I've been trying to post a new thread but it won't let me and I keep getting the message:

"Post denied. New posts are limited by number of URLs it may contain and checked if it doesn't contain forbidden words."

I didn't have any URLs in my post nor any offensive words, so what is going on?

Thanks if you can help.
 
Hi Jaybead, strange? You seem to have started a new topic here and its worked.

Maybe those forum Gremlins again.
 
I'm currently having the same issues when trying to post in the NUS Thread.

I only registered to pass on some important info on that thread and it won't let me!
 
Last edited by a moderator:
its all down to the fact that you both only have a few posts to your names.
get posting regularly and you can with in time "access all areas"
that is if you don't get banned in the meantime for inappropriate wording
 
Status
Not open for further replies.

Reply to Having problems posting in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
93
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
281
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
238
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
177
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
34
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock