Search the forum,

Discuss Header tank overflowing and water is hot in the tank. in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
23
Hi all,

Just recently noticed the overflow has started pouring water out, there are three tanks in the loft and I'm quite sure this is from the heating.
We have two boilers, one for water and one for the heating, it's an 8 bed Victorian house (bed and breakfast)
I went into the loft to see what was going on and the water in the tank is hot!

can anyone shed any light on this?

I have a pic on my phone, will try to upload it...
 
photo_2023-10-07_15-06-00.jpg
 
Heating on ?
 
You can see water is flowing into the overflow pipe on the right of the tank.
You need to purchase a float valve and arm

Screwfix sell one for ÂŁ7.99


get a new float ball as well - sometimes they don't come off too easily.
Yeah, I noticed the arm had been previously bent down, an old trick to get a few more years service from the valve so it's probably ready for renewal but the most concerning thing is the fact that the water is hot, you can see the tank is deformed from the heat, If I fix the overflow issue, it's only going to create a problem somewhere else (maybe), and anyway, it just can't be efficient heating that tank.
 
If this is pumping over or expansion from the heating system it could potentially be a dangerous situation!
I can remember a report of a HW cylinder overheating, causing very hot water in a loft tank which distorted and deposited scalding water on the occupants of the bed in the room below.
Hopefully your tank is not so sited, but it sounds essential to fix quickly, especially in a B & B!
 

Reply to Header tank overflowing and water is hot in the tank. in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
195
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
243
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
240
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock