Search the forum,

Header tank

Post new thread

Discuss Header tank in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

sjaisie

This is my first post so I am hoping you will be able to advise me?

I need to change the header tank on my hot water cylnder and due to space restraints I need to change from a 50 gallon to a 25 gallon tank. Will I lose a lot of hot water pressure by doing this?

Thanks
 
No, the only thing the header tank feeds is the hot water cylinder. And all the hot water cylinder is used for is upstairs sink and bath and downstairs sink!
 
Status
Not open for further replies.

Reply to Header tank in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
165
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
Chuck
C
T
Megaflo Unvented Turn Off When on Holiday?
Hi, Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably no need for me to needlessly heat hot water. My intention was to turn the boiler off along with the mains water when going away. Now, I have heard...
Replies
1
Views
120
ShaunCorbs
ShaunCorbs
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
263
oz-plumber
O
G
UK Moving Pipes Undersink for Dishwasher
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
467
Basher
B
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electricians Talk
Tile News
TilersForums.co.uk
Tilers Forum
Tiling Tools
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock