Search the forum,

Discuss Healthcare Wash Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Howsie

Esteemed
Plumber
Subscribed
Messages
5,232
I'm looking for some suggestions on where to source some reasonably prices washroom taps with a difference. These are for use in a hospital laboratory and need to have legionella resistant hoses. The taps are used for washing equipment that is used to cut up bodies etc. Yuk.
 
I'm looking for some suggestions on where to source some reasonably prices washroom taps with a difference. These are for use in a hospital laboratory and need to have legionella resistant hoses. The taps are used for washing equipment that is used to cut up bodies etc. Yuk.

Is there a full spec to work to Howsie?
 
You won't find any reasonably priced ' healthcare taps' they will by there very nature be expensive, because........ They are ' healthcare'
 
I'm afraid not Ray. Basically they are to replace this sort of thing:

IMG_0503.jpg
 
You won't find any reasonably priced ' healthcare taps' they will by there very nature be expensive, because........ They are ' healthcare'

Indeed. They seem to be using the same pricing factor as wedding planners.
 
We have recently had to change some taps in local health centres, for long arm single pillar mixers, due to an upgrade in the requirements, my boss who is the tightest you will ever meet spent hours trying to source cheap and cheerful, in the end I think the taps were in the region of £200 each, because that is what they had to be.
 
qame3a7e.jpg
iCan't u use the catering / sluice tap, has 600 rigid riser from top of block and a restrained hear that cannot get within 150mm of spill over?

Would need to put a blanking plug in ex hole and re fix at wall as it needs to be fixed back.
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Healthcare Wash Taps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
241
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
251
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
359
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
138
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
259
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock