Search the forum,

Discuss Heater in plinth in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

LCV

Hi,

I am redoing my kitchen and will not have wall space for a radiator. It is an open plan room so there will be radiators in the living room. I am a little concerned that the kitchen might feel cold in Winter so trying to decide whether to fit a heater in the plinth or not.

I am wondering how effective they are and if they are noisy when on. I am thinking of having a central heating one.

I would appreciate your views on them good or bad. And if you like them, which would be a good brand to go for.

Thanks!
 
Fitted a couple for a chap who had the same problem. He says they're good when they're on but he rarely remembers to turn them on
 
ok. quite quiet, better than nothing.

myson or smiths are the popular ones.
iirc smiths has a higher output than myson but best checking manufacturers spec

can blow the fan cold in summer
 
Yes they are good, if you leave it on a slow speed, then they aren't that obtrusive
 
They have a built in sensor on the heating pipe work that will only allow the fan to run when the pipe is hot, so you can leave them on the winter setting all the time. The fan just comes on and off with the heating (& room stat if required), only switch over to summer setting if you want to override it.
They just need a clean from time to time to keep filter clean.

You can get High Line version as well, had one for years.
 
Status
Not open for further replies.

Reply to Heater in plinth in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
225
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock