Discuss Heating problem on floor standing boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

samtheplumber

Hi guys,
I have a old floor standing Glow worm boiler. and when fired up heating gets upstairs ok from the 28mm pipes on the left hand side, but there are 2 x 22mm drops on the right to feed downstairs rads and is tee'd back into the boiler via a pump. Is the pump faulty? or is there a blockage after the 22mm tee? (hot above the tee not below)

Cheers guys
 
get a magnet to test the pipework if it sticks it is blocked. also could be pump.
 
Status
Not open for further replies.

Reply to Heating problem on floor standing boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock