Heatrae Sadia

[GRJA]

Looking to convert over the sink discharge pipe on a Heatrae Sadia to a fixed tap on sink Can i extend pipe work to a fixed tap leaving the supply valve to tank constantly open or would i need to fit a header tank.

 

[BLOD]

give us a clue ?
maybe say exactly what heatrae unit you've got or give a picture ?

 

[Chalked]

No you can't. You would need a different heater. Put a tap on and you have made a bomb!!

 

[Ray Stafford]

Heatrae Sadia do make self-venting taps to put on SOME of their pressurised units. However, they are not cheap and often cost more than the unit that they are connected to.

 

[GRJA]

Yes would be a good idea its a Heatrae Sadia B3M, Thanks

 

[BLOD]

If it's mains fed then no you can't.
If it's cistern fed then to use a normal tap you need to fit an open vent pipe.

there's a good diagram in the manual
http://www.heatraesadia.com/docs/B3M_C3M_-_Issue_1_-_36005722.pdf