Discuss Help identifying broken "ceramic" part found in toilet bend in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hi all,

Hoping for some help to identify this - images attached -

  • I found this in the bowl of my wall mounted toilet in the upstairs bathroom
  • geberit parts but installed by previous home owner
  • The toilet works and there’s no obvious external leak or smell
  • I’ve got 2 kids so not impossible it’s from elsewhere but it looks like something that’s been exposed to liquid for a long time
My guess is it didn’t come from the cistern as it’s too big to travel down unnoticed and feels like ceramic - so more likely from just after the bend.

We had some work done two years ago to fit a new en-suite toilet toilet on the same system so could be from that. In general though most of the system has been looked at recently.

Any ideas before I start pulling tiles off the wall would be really appreciated - again right now the system works fine as far as I can tell and not sure if this actually needs fixed at this point

Cheers

John


Toilet1.jpg
 
The other thing it could be is tile grout.
Tilers have caused many issues pouring the the bucket of water they use for cleaning up grout down drains.

I wouldn't go as far as taking tiles off the wall if everything is working correctly. If you want some piece of mind, hire someone with a drain camera to inspect the drain beyond the pan
 
thanks guys - Oz and co, these responses have me wonder if the builders and painters used this toilet dispose of the water used to wash paint brushes and plastering tools etc --- maybe it's a build of of that..?
Main thing is, assuming things keep working, I won't be ripping the bathroom apart this weekend (and wife and kids assume I will be so are off out) so instead I'll be sitting in front of the telly.
Cheers guys - will shout if things go wrong
 
Cheers Pal,
Enjoy your weekend - be f-all on tv due to being so close to Xmas.

You could always watch the Aussies v India test match in Perth.

I know - you being a Pom - much the same as me being an Aussie, we support any team playing against each other.

I would go for any team playing England much the same as you would go for any team playing Australia.
 
Grout and / or adhesive that had water flowing over it while still soft to give the shiny appearance. As to ripping the place apart... "if it ain't broke"...
 

Reply to Help identifying broken "ceramic" part found in toilet bend in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

hi from Croatia One crazy plumber make many 90° piping for toilets drainage. I need to correct because i am suspicious that this setup can work...
Replies
0
Views
634
Just moved house. Need to change the seat on this toilet, but after buying 3 (that did not fit), and spending around 6 hours trawling the web, I...
Replies
7
Views
1K
Hi firstly no expert so apologies in advance but have a little bit of knowledge ( sometimes dangerous I know, lol) The wife is wanting to change...
Replies
5
Views
1K
I wonder if anyone is able to help with advice on this. We have fitted a new toilet and 6 litre cistern .. it flushes .. but not as efficiently as...
Replies
14
Views
2K
I recently moved into a new flat and both toilets were dripping when not in use. I found that the issue was the flush valve seal and replaced it...
Replies
0
Views
957
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock