I need help to identify the brand of this unit for spare parts. The plastic thread for the lever has worn out, also the shower isn't very hot now even with hot valve opened all the way.
- Thread starter Dakiloth
- Start date
- Replies 0
- Views 726
- help identifying mixer mixer showers mixer valve parts shower shower mixer spare thermostatic valves
Discuss Help identifying shower mixer for spare parts in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Reply to Help identifying shower mixer for spare parts in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Hi All,
Looking for some advice on my little bathroom project.
I took the bath out. I got a shower jacuzzi thing.
The base has 2 wheels in the...
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Newest Plumbing Threads
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 5
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2