Search the forum,

Hi all new plumber on board :-)

Post new thread

Discuss Hi all new plumber on board :-) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Michael david

Hi all thought id register on here to see what its all about, am 23 and i currently work for balfour beatty engineering services as commercial plumber / pipefitter
 
Hello Mike and welcome ...where are you based and where are you working at the moment..regards Turnpin:rolleyes2:
 
Hiya turnpin am based in the northwest live in liverpool but work all over the uk am currently working on the manchester city football academy we've finished the under pitch heating and rain water harversting, and started the energy centre last week its the first time ive seen 4" copper pipe no use for a pipebender on that job :)
 
Michael david said:
Hiya turnpin am based in the northwest live in liverpool but work all over the uk am currently working on the manchester city football academy we've finished the under pitch heating and rain water harversting, and started the energy centre last week its the first time ive seen 4" copper pipe no use for a pipebender on that job :)
Click to expand...
Great to fill your scrap bag though lol this is a great place to exchange or borrow a vast aray of knowledge hope you stick around ...regards Turnpin;)
 
Status
Not open for further replies.

Reply to Hi all new plumber on board :-) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
201
Lou
Lou
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Chuck
C
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
114
Sonya K
S
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
229
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling News
Tile Cutters
Tiling Advice
Electrical Forum for Electrical Advice
DIY Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock