Search the forum,

Honeywell ST699 Replacement

Post new thread

Discuss Honeywell ST699 Replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
moonlight

moonlight

Plumbers Arms member
Plumber
Gas Engineer
Messages
948
Hi All,

Just wondering if anyone knew what would be the best replacement programmer for the Honeywell ST699? Other than like for like.

My customer has a y plan system. Useful if the back plate matched. I don't want a pack just the programmer. Thanks
 
Won't get one with the same backplate so either need the same prog or rewire a new back plate in

Drayton lifestyle
 
depends on your customer..
we call that the 'granny' programer around here cos its dead easy to use, if they are faced with a 5/2 RF stat they may just be bewildered :D
 
Jay The Plumber said:
depends on your customer..
we call that the 'granny' programer around here cos its dead easy to use, if they are faced with a 5/2 RF stat they may just be bewildered :D
Click to expand...
Wasn't planning on rf stat. If that were the case I know exactly what I would fit the vrt350f. I think I may as well fit like for like.
 
Status
Not open for further replies.

Reply to Honeywell ST699 Replacement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
216
SimonG
SimonG
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
311
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
222
mutley racers
M
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
153
Lou
Lou
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
150
Stigster
Stigster
Creating content since 2001. Untold Media.

Newest Plumbing Threads

TilersForums.co.uk | UK Tiling Forum - Est 2006
Tile Advice
Tilezine Tiling News Tile Association
Tilers' Talk
Tiling Blog
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock