- Messages
- 90
Please let us know the outcome thanks
Discuss Honeywell Valve Not Working in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I cannot see where you have confirmed there is 240V at the valve motor. Is there 240V at the MS?
Oh! Then it definitely isn't wired up correctly. Should I move them one step to the right? Here's the other end of that cable in 4 and 5. It literally isn't connected to anything. I don't know if it has come loose or what, but surely this is the reason why it is working? Now the question is, where do I connect these? Thanks a lot for the help. Really appreciate it!6 is call for heat for hot water
Thank you. It wasn't necessarily folk questioning the electrician; it was the comment that said get a new electrician and plumber without any reason why. That comment wasn't really of any use however, once the reasons were explained, it made more sense.You cannot do that job over a forum or the phone mate. Looking at the picture of the junction box it doesn’t look wired in as standard. Needs a clued up heating engineer to wire it in correctly. I know you wasn’t happy before when I/we questioned your sparky and engineer but sadly our experience tells us that this is quite common. Hope that you get sorted mate
Where about are you in the world?Thank you. It wasn't necessarily folk questioning the electrician; it was the comment that said get a new electrician and plumber without any reason why. That comment wasn't really of any use however, once the reasons were explained, it made more sense.
Thank you. I'll just have to get someone you specialises with heating and themostats in particular and go from there. At least we now know what the cause is (hopefully). Thanks to everyone for your input!
I'm near Belfast in Northern Ireland. Cheers!Where about are you in the world?
To far for me. Sorry.I'm near Belfast in Northern Ireland. Cheers!
No worries, thanks anyway!To far for me. Sorry.
I'm near Belfast in Northern Ireland. Cheers!
Reply to Honeywell Valve Not Working in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.