Discuss how fix broken faucet? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 34,368
- Solutions
- 2
Could you get a new cartridge? Eg the bit that the screw has broken in
I think he needs a US equivalent of this forum. Looks very much like a faucet and very little like a tap. I've only ever mended taps.
Oh, I see we're international now! I'll shut my mouth and see if we have any American members who can assist.
Oh, I see we're international now! I'll shut my mouth and see if we have any American members who can assist.
- Messages
- 1,237
Indeed we appear to be global ...the problem with this enquiry is that USA and Canadian threads on things are usually different not only regarding Diameter but the pitch is often different CHKing
Reply to how fix broken faucet? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix.
Last week the right hand hot tap makes...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form...
