Discuss How to remove Shower riser rail in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

jsm

Messages
25
Hi
Trying to remove the riser rail, but cannot see any way to take it off, can't see any grub screws etc... Any help appreciated

Thanks
 

Attachments

  • image.jpg
    image.jpg
    504.2 KB · Views: 22
Yes, it looks like a Mira one. Using a flat bladed screwdriver, or similar, prise in between the tiny gap and push it down (indicated on edited photo), this should hen reveal a screw.
 

Attachments

  • ECAC1A97-9867-4AC6-8129-C9C34C675264.jpeg
    ECAC1A97-9867-4AC6-8129-C9C34C675264.jpeg
    1.2 MB · Views: 12
The grey coloured end bit will be concealing the screws.
It will slide off, either downwards or forwards away from the wall.
Although a sharp tap with a hammer would suffice if necessary.
 

Reply to How to remove Shower riser rail in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

C
We've just purchased a grohe vitalio joy 260 not realising the shower riser rail is not adjustable and it is too long/tall for our shower it hits...
Replies
1
Views
325
Please can someone tell me the best way of removing a siliconed folding support rail that has been siliconed to a tiled bathroom wall at my mums...
Replies
4
Views
424
Hi all. Shower is leaking into downstairs when water is being aimed at wall . All sealant has been redone on outside and between shower tray and...
Replies
4
Views
347
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
286
Hi, I am trying to clean out my Merlyn Truestone slate shower tray waste unit. I cannot see anyway to remove it to clean underneath. I'm stuck...
Replies
6
Views
410
Back
Top