Icos he18 l and f code

[Christopher Powell]

Hi all. Hope you can help.

Been to look at an ideal icos he 18 l & f code. Done everything from the flow chart and changed the flame detection probe. Contacted ideal and they're advice was to boil the kettle a few times and flush the heat exchanger to clear the aluminium oxide build up.

Ive also cleared the trap and cleaned out the sump at tue bottom of the heat exchanger. The water i poured in ran out freely with no restrictions.

Im stumped. Could it be a faulty gas valve as it runs fine for 5 or 10 minutes then cuts out. Leave for a minute and reset and it'll come back on.

 

[Sharp Point]

Are you gas safe? If so contact Shaun corbs

Thanks

 

[Christopher Powell]

Are you gas safe? If so contact Shaun corbs

Thanks

I am. Is this not the gas safe forum? Who is shaun corbs?

 

[Sharp Point]

Nobody will answer you, until you register with Shaun ...the gaffer

 

[Christopher Powell]

Nobody will answer you, until you register with Shaun ...the gaffer

Ive registered on this site with my gas safe number but it says i have insufficient privileges to be in the gas safe only forum. Im confused. How do i contact this shaun then? Thanks for your help by the way.

 

[Sharp Point]

If you were registered, you’d have the blue badge.... but you don’t get the free parking

 

[Christopher Powell]

If you were registered, you’d have the blue badge.. but you don’t get the free parking

 

[Sharp Point]

Like I said, you need the blue badge.

 

[Christopher Powell]

Like I said, you need the blue badge.

Trying to figure out how to get it

 

[townfanjon]

I have summoned him , he will be along in a bit @ShaunCorbs

 

[Christopher Powell]

I have summoned him , he will be along in a bit @ShaunCorbs

Thanks. Im new here so getting used to everything is gonna take a while

 

[ShaunCorbs]

You rang

 

[townfanjon]

You rang

Sort Chris , then I can help lol

 

[ShaunCorbs]

Sort Chris , then I can help lol

Yes boss

 

[Christopher Powell]

Hi Shaun. When i registered on

Sort Chris , then I can help lol

Is the help gonna be tell them to scrap it and fit new lol