Discuss Internal Leak, will the boiler still draw cold water when turned off? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

M

Matt Carney

In April 2018 I had a water meter installed at my tenancy property (Not a property magnate, just had to move out of the area and couldn't sell it) the same time I had a new Greenstar 30i boiler, stopcock and old back boiler and immersion tank removed.

There is a small pass noticeable through the water meter, approx. 3 litres per hour. The leak dial turns slightly, then stops, and does this repetitively, in this fashion. I've done this even isolating all appliances including toilet, sink, washing machine etc.

The pipe from the meter to the stopcock is fine. No movement on the meter at all.

Before I get a plumber in to pull the ground floor floors up, is there any way my new boiler could be drawing cold water from the system after its been switched off? This is the only thing I haven't isolated. I don't want to mess about with the boiler incase I gas the tenant!
 
In April 2018 I had a water meter installed at my tenancy property (Not a property magnate, just had to move out of the area and couldn't sell it) the same time I had a new Greenstar 30i boiler, stopcock and old back boiler and immersion tank removed.

There is a small pass noticeable through the water meter, approx. 3 litres per hour. The leak dial turns slightly, then stops, and does this repetitively, in this fashion. I've done this even isolating all appliances including toilet, sink, washing machine etc.

The pipe from the meter to the stopcock is fine. No movement on the meter at all.

Before I get a plumber in to pull the ground floor floors up, is there any way my new boiler could be drawing cold water from the system after its been switched off? This is the only thing I haven't isolated. I don't want to mess about with the boiler incase I gas the tenant!

Yes, but this could be a boiler leak in a few different ways. I’m not going to be giving pointers so best getting your gas safe registered engineer in to look at the boiler 1st.
 
The 'pulsing' nature of it suggests something passing after the pressure builds. So in my opinion it's more likely to be plastic if you have any. Any underfloor - possibly mice?
 

Reply to Internal Leak, will the boiler still draw cold water when turned off? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Good afternoon, I am experiencing a pressure issue with my heating system and was hoping to receive additional insight as to what the problem...
Replies
9
Views
400
Hi, I need some urgent advice. I've Just come home after going out for evening, to discover hallway floor and kitchen floor covered in water. On...
Replies
1
Views
531
Some advice please about a really worrying problem. I live in a terraced 2 bed room house. 10 days ago the gas combi boiler stopped heating the...
Replies
3
Views
536
Hi all, Hope you’re all doing well. I had a new bathroom installed recently which involved new piping, and also capping off some redundant...
Replies
3
Views
737
T
Please advise me. I am a disabled pensioner. I had a wet room fitted just over a year ago using a local authority grant. Builder was employed by...
Replies
0
Views
289
TheCatWhoNeedsaHotShower
T
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock