Search the forum,

Kingfisher MF RS 60 + Remedial flue kit??

Post new thread

Discuss Kingfisher MF RS 60 + Remedial flue kit?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

super61

Hi all,

I went out to a Potterton Kingfisher MF RS today. Found that the inner flue has rotted out (as usual for the Pottertons of the day).
Instinctively I assumed that since you can get a remedial kit for the Profile, Prima etc etc- that meant I would be able to find one for the MF RS... But I can't seem to find one listed anywhere.

So can anyone point me in the direction of one?
Also the flue terminal looks suspiciously similar to the Profile one. Are they one and the same? Would a profile kit fit?

Thanks in advance.
 
Sorry forum rules forbid us from giving information on gas related repairs
 
We're more than happy to help you, just not in open forum. Please build your post count up to 10 + then send an image of your gsr card to [email protected].

Ta.
 
Status
Not open for further replies.

Reply to Kingfisher MF RS 60 + Remedial flue kit?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
227
mutley racers
M
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
157
Lou
Lou
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
210
Thomas J Marshall
T
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
289
ShaunCorbs
ShaunCorbs
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
244
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Electrical Blog
UK Tiling Forums
Tile Cutters
UK Tiling Forum
Electricians' Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock