Less than 300mm and pipes up the back

[Scott_D]

Baxi 600
WB compact
Do I have any other options?

 

[ShaunCorbs]

Atag but don’t know sizes

 

[Harvest Fields]

Am I they only one that is lost?

 

[townfanjon]

Am I they only one that is lost?

No , it took me a while lol

 

[Harvest Fields]

Are you on about the clearances for the flue?

 

[Scott_D]

Atag but don’t know sizes

They are about 340mm deep
[automerge]1565977381[/automerge]
Sorry should have typed a better message

I need a combi boiler that’s less than 300mm deep and can be rear piped without a stand off

 

[Harvest Fields]

What width have you got?

 

[Scott_D]

What width have you got?

A 500mm wise cupboard to go in

 

[Harvest Fields]

I have fitted a Vaillant ecofit in a 500mm cupboard and got the pipes down the sides. Tight but worked nicely.

 

[Aire]

Don't know if you can pipe up the back but the ideal i-mini and glowworm energy are 280mm deep

 

[Scott_D]

Don't know if you can pipe up the back but the ideal i-mini and glowworm energy are 280mm deep

they would need a stand off kit

 

[Harvest Fields]

Don't know if you can pipe up the back but the ideal i-mini and glowworm energy are 280mm deep

Not necessarily, they are only 395mm wide

 

[king of pipes]

Just about complete on this one Scott new Baxi 630 boiler and new kitchen install, few doors to fit today then wrapped up as you can see the boiler fitted in a kitchen unit ok , went for the full height wall units from Howdens. Kop

 

[Scott_D]

Good work KOP

I have quoted a back 630 and vaillant 830

 

[Aire]

With the baxi get the pre plumb kit, costs £40 quid but saves hassle of setting pipes yourself and allows for a horizontal flue