Search the forum,

Discuss Looking for a Gas Safe engineer to install a Viessmann Boiler SE London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
13
Hi, i’m looking to upgrade my heating system; i currently have an unvented system with a Potterton Boiler, cylinder in the airing cupboard (1st floor).

what i want to do is change the boiler to a Viessmann in a new position - cupboard at the front of the property - see pics.
Also i want the cylinder to me moved in the loft - pics attached as well.
The gas meter is right in front of the outside cupboard. The gas pipes seem to come to the boiler via 1st floor flooring?

we are quite on a budget, so ideally we would want a sole trader, but you need to be gas safe - number required and we will check.

i hope the pics and description can enable someone to send some quotes in.

any further questions please fire away.

52530ED1-7ADF-4DC5-950D-D82AFC8D9F9C.jpeg
CCBAD55D-1C4B-407A-8D2F-4AD8C1DC02F7.jpeg
70DAF5E8-7A4A-4D7F-BF9F-68C3CEAB0FFE.jpeg
87DB882D-CFEA-42EE-86E6-F6C92DA7B4DF.jpeg
E0216C54-3AB5-4237-8AEF-84F22C13F3E4.jpeg
E6B5823F-7181-4D60-9BC7-AF11D6234743.jpeg
F10CAFD1-A350-4B4B-925E-ABF2D5B23F00.jpeg
9E566A57-9E2F-4160-8667-792C92580988.jpeg
 
Status
Not open for further replies.

Reply to Looking for a Gas Safe engineer to install a Viessmann Boiler SE London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
204
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
1
Views
49
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
503
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
291
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock