Search the forum,

Discuss Looking for a Westminster 1902 bath/shower mixer valve diverter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
293
Hi

I am trying to track down a Westminster 1902 bath/shower mixer valve diverter. I thought I could replace it with a Bristan 1902 diverter but it does not fit> I have tried my usual sources but no luck. I am sure there must be some company who keeps them.

It is the valve on the left in the picture. The one on the right is the Bristan

Any help greatly appreciated

Paul

20180129_144315.jpg


20180129_144350.jpg
 
Do you know where the tap came from ? sometimes these are imports sold in the DIY sheds Wicks etc. and replacement parts almost impossible to get may have to replace the complete tap for a Bristan one
 
Do you know where the tap came from ? sometimes these are imports sold in the DIY sheds Wicks etc. and replacement parts almost impossible to get may have to replace the complete tap for a Bristan one
Thanks for your reply. No I have no idea where it was bought. As you say if I cannot get a replacement I will need to replace it with a Bristan
 
Status
Not open for further replies.

Reply to Looking for a Westminster 1902 bath/shower mixer valve diverter in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
170
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
2
Views
60
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
384
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
504
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the depth of my cupboard is larger than this. The issue, however, is that the waste pipe which leads from the sink (next door cupboard) comes out quite a...
Replies
22
Views
474
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock