Mini saw

[hammers4spanner]

Just bought on of those mini saws today what a cracking piece of kit BOOM

 

[hammers4spanner]

I squeezed it under a kitchen cupboard yesterday can't do that with circ saw , plus mess circ makes is ridiculous.Owned a multi tool better off in the bin than the van big bonus of this tool is depth set on it so can get precise cuts on flooring without cutting cables or pipes.
You can get this in places you can't with angle grinders as well plus less dangerous and less noise,you don't have to buy one for hundred either more you pay the better the motor more drive on the cut.

 

[newcastle phill]

My cordless circular does that tho & this dosent look to be a match for a circular saw

Its s fraction of the size of a circ saw. I cant speak for his. But mine has a high speed 85mm blade and its deffo faster for some jobs compared to my multi tool.
They both have their strong points and complement each other
My mini plunge saw is 20v lithium

 

[Phil]

Sounds good but I fear its just another toy to get its lead wrapped round my legs as I stagger around after kneeling too long..

 

[hammers4spanner]

Its s fraction of the size of a circ saw. I cant speak for his. But mine has a high speed 85mm blade and its deffo faster for some jobs compared to my multi tool.
They both have their strong points and complement each other
My mini plunge saw is 20v lithium

i won't go back to a circa saw now i have this

 

[ShaunCorbs]

i won't go back to a circa saw now i have this

whats the max it can cut depth wise ?

 

[clarky101]

I got the BnQ one last week for £58.....not bad...

 

[rpm]

whats the max it can cut depth wise ?

20mm @ 90 degrees according to the specs.

 

[ShaunCorbs]

20mm @ 90 degrees according to the specs.

does that say on what and have you tried ply/floor board?

 

[rpm]

does that say on what and have you tried ply/floor board?

There`s a link in post #3 Shaun.

 

[gmartine]

I have a Worx plunge mini saw which isn't the very best brand but I find it perfect for cutting out a floorboard or any board for that matter. If it's a longer run then of course I use something bigger but for a couple of boards at a time it's quicker than my multi-tool and far easier to handle than a full size circular saw.

[video=youtube;rZntBeXJhpU]https://www.youtube.com/watch?v=rZntBeXJhpU[/video]

 

[PONU]

Seems a great little tool somebody's got to make an 18v version of this chop chop makita

£55 at Argos at the min cheap to !

 

[Phil]

Damn this thread...I want one now.

I have Bosch 10.8 drills, maybe I should get this..

[DLMURL]http://tse1.mm.bing.net/th?&id=OIP.M05223c4b07110f600d877893072c956bo0&w=300&h=300&c=0&pid=1.9&rs=0&p=0[/DLMURL]

 

[jtsplumbing]

Sounds good but I fear its just another toy to get its lead wrapped round my legs as I stagger around after kneeling too long..

Don't think the staggering around is fault of knees , :17:

 

[Roger Welton]

I looked at these a while back, and decided whilst it would be useful on occasion, it does nothing that my fein cant do (maybe takes a little longer)

 

[newcastle phill]

It can.
It can have your fingers off in a jiffy !