Search the forum,

Novopress ACO103 jaws

Post new thread

Discuss Novopress ACO103 jaws in the Plumbing Tools area at PlumbersForums.net

S

SA7426

Messages
10
Hi there

I just bought a Novopress ACO103. I attached a picture of the machine and the jaws. Can someone tell me what fittings can be used with these Jaws? Im new to press and these seems to be alot of different names. Connex banninger, m press, v profile etc
Any help you can and links would be greatly appreciated.

Thanks
IMG_20201002_145350.jpg
IMG_20201002_145111.jpg
 
Yorkshire x press
Geberit Mapress
Mpress
Sanhra
 

Reply to Novopress ACO103 jaws in the Plumbing Tools area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
279
exedon2
exedon2
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
311
oz-plumber
O
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
198
ShaunCorbs
ShaunCorbs
D
Replacing outdoor P-Trap Gully with Bottle Gully
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
139
DIwhYdidIstartThis
D
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
152
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Forum
Tiling News
UK Tiling News
Tiling Advice
Tiling Forum UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock