Search the forum,

Discuss Offset Quadrant tray 1200x800 in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
2
Will any offset quadrant tray fit any same sized enclosure ?

ie...are they all the same shape ?

Or does each make of enclosure req a specific tray

I'm getting the Toreno gold 1200x 800 (see oic),there's 100s of trays of the same size and shape
 

Attachments

  • Screenshot_20230918_153337_Chrome.jpg
    Screenshot_20230918_153337_Chrome.jpg
    207 KB · Views: 5
The standard is 550 radius, so much so that this is assumed unless stated otherwise.
So yes any tray.
There are very few exceptions but they should say so.
Obviously first check that your chosen enclosure is R550.
 

Reply to Offset Quadrant tray 1200x800 in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
182
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
194
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
226
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
242
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock