Discuss Plumber or electrician to replace new timer switch Unvented cylinder in the USA area at PlumbersForums.net

Messages
15
Replace the current E7 Newlec Economy control to a mechanical 24 hour timer switch for unvented cylinder water heater, may I know if I ask plumber or electrician to do this job.

Because Newlec Economy controller can heat up water once a day in midnight .I would require constant hot water in different time slot per day.

How to Make sure that Timer switch wire connects with bottom element instead of top element ( boost). As the boost can heat up 1/3 of tank water only.

Appreciate for any help or guidance. Thank you.
 

Attachments

  • replacement.png
    replacement.png
    291.7 KB · Views: 11
Spark but that timer you have chosen isn’t suitable for your setup
 

Reply to Plumber or electrician to replace new timer switch Unvented cylinder in the USA area at PlumbersForums.net

Similar plumbing topics

Would need some advice if I could replace Newlec Economy to OP Ecosave Timer control for “Unvented Cylinder Megaflo Water heater” As the...
Replies
7
Views
4K
Good evening, I'd like your opinion on something that is worrying me please: my landlady's plumber replaced the bottom/night element of my...
Replies
2
Views
487
Hello, I have a few questions about my unvented hot water storage cylinder please: 1. How many kWh is each 3kWh element (day / night) supposed...
Replies
12
Views
943
Hello, I am renovating a small bathroom in an apartment on the 5th floor. Heating is electric, no gas or oil. I have four (related) questions...
Replies
1
Views
784
J
Hello, hoping someone can advise me. My boiler stopped working - no hot water or central heating. Called out a company who came and assessed the...
Replies
2
Views
513
Back
Top