Search the forum,

Discuss Post your Heating horrors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
Hears one to make you smile guys sure you all have some pictures on ya moby post em up lets have a giggle cheers kop

20170328_122423.jpg
 
I like the upside down magnaclean up top,,, absolute cracker ,, it just goes to show how many diyers chance there mitt lol,,,,,
 
Surprising what you find behind a radiator come on guys post a few corkers up.cheers kop

20160208_142132.jpg
 
It's an awful looking bathroom. However, I haven't worked on it just yet but quoted for a refurb.
 
Well i would charge a good wack to kneel down in there to change inlet valve , if i was ripping it out then thats different
 
That's been a commercial lad who's fitted that
 
Status
Not open for further replies.

Reply to Post your Heating horrors in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
205
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
165
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
151
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
261
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath the boiler is difficult with lots of obstacles, is it okay if I run soldered copper over / across the top of the boiler? It'll be about 4" off the top...
Replies
2
Views
154
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock