Pumps from an old boiler - connections

Post new thread

Discuss Pumps from an old boiler - connections in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Jay The Plumber

Jay The Plumber

Messages
367
I took out a reasonably new boiler the other day, got a good condition wilo pump in but does not have the standard pump connectors on it, has quick connectors onto annealed copper or summat.
any way to convert these pumps to standard connections?
 
a pic would help as i have no clue by your description
 
Status
Not open for further replies.

Reply to Pumps from an old boiler - connections in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
208
John.g
J
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
337
ShaunCorbs
ShaunCorbs
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
248
Lou
Lou
K
Running copper pipework above / across a Gas boiler?
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath...
Replies
2
Views
270
kristeva
K
P
  • Question
Could the BAXI commercial boiler parts/flue melt ?
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
154
oz-plumber
O

Newest Plumbing Threads

Back
Top