Search the forum,

Discuss Ram pump in series with water level controller in the DIY Plumbing Forum area at PlumbersForums.net

Messages
2
I have a draft Idea to connect water level control valve in series with ram pump . This setup will be inside inlet of loft tank. The Idea is to pull water from Over head tank in to loft tank quicker. Please review and suggest.

water level control valve :

ram pump:
Design:
Loft tank inlet => water level controller => ramp pump
 
Not a good idea. If you want to increase the flow, increase the diameter of the pipe between the overhead tank and the the destination.
 

Reply to Ram pump in series with water level controller in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
258
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
409
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
184
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
231
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
306
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock