Search the forum,

Discuss Shower Faucet brand? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
1
My shower pipe is leaking and one of faucets is stuck , i am unable to rotate that for hot water control . I am not able to find brand name of it , is there anyway i can find out brand name so that i can get a replacement? Thanks in advance
 

Attachments

  • IMG_20211116_131700.jpg
    IMG_20211116_131700.jpg
    223 KB · Views: 12
  • IMG_20211110_144551 (1).jpg
    IMG_20211110_144551 (1).jpg
    227.2 KB · Views: 11
  • IMG_20211116_131706.jpg
    IMG_20211116_131706.jpg
    219.9 KB · Views: 12

Reply to Shower Faucet brand? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Hi All, Looking for some advice on my little bathroom project. I took the bath out. I got a shower jacuzzi thing. The base has 2 wheels in the corner. Do I assemble the unit first attach water and elec, and slide the very heavy unit in on the two wheels? Or do I get the base in the corner and...
Replies
2
Views
93
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
249
Hi All, I am looking to take my bath out and fit a shower. Regards to tanking. Is it ok to just seal everything with plastic rather than just paint tanking slurry? Thanks in anticipation, best regards Staggers
Replies
3
Views
247
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
232
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock